Geberit Duofix mounting element for wall-hung toilets, 112 cm
With Sigma concealed cistern 12 cm
For metal and wooden stud walls
For Geberit Duofix system walls
For installation in partially high or floor-to-ceiling pre-walls
For installation in floor-to-ceiling partition walls
For floor thicknesses of 0-25 cm
For wall-hung toilets
Specifications
Statically self-supporting frame, protected against corrosion by powder coating
Frame for wall-hung toilets with connection dimensions according to EN 33 and a projection of up to 70 cm
With pull-out plate for lateral installation above the mounting element on metal or wooden profiles or on Geberit Duofix system posts
Alternative mounting position for wall anchors
Rotatable base plates, suitable for installation in UW 50 and UW 75 U-profiles
The base plates can be mounted into the Geberit Duofix system rail without tools and without additional components
Galvanized supports, corrosion-protected, with Anti-slip properties
Connection elbow for tool-free installation at various depths, adjustment range 45 mm
Geberit Sigma 12 cm concealed cistern, with condensation protection
For front-mounted operation, suitable for single flush, dual flush, and start/stop flush
With factory settings, an immediate additional flush is possible
Installation and service work on the cistern without tools
Water inlet at the rear or top center
Rough installation cover for service hole with shortening option, protects against moisture and dirt
With pipe protection for the water supply line for the Geberit AquaClean shower toilet and for the connecting line
Attachment option for power connection and Power & Connect Box
Technical specifications
Flow pressure: 10 - 1000 kPa
Maximum water temperature: 25 °C
Flow volume - factory set: 3/6 l
Large flush volume - adjustment range: 4/4.5/6/7.5 l
Small flush volume - adjustment range: 2 - 4 l
Calculated flow rate: 0.09 l/s
Minimum overpressure for design flow: 10 kPa
Scope of delivery
Water inlet R 1/2", suitable for MasterFix and MeplaFix, with integrated angle valve and handwheel
Cover for rough installation for service opening
Connection fitting for toilet, diameter 90 mm
Connection elbow 90° PE-HD, diameter 90 mm
Spout made of PE-HD, diameter 90 / 110 mm
Mounting material
Geberit 111.925.00.6
kvaliteetne valik DigiGo e-poodDuofix - Geberit 111.925.00.6
- Tootja: Geberit
- Mudel: 111.925.00.6
- Saadavus: Partneri laos 6-12 t.p
-
297.60€
- Maksudeta: 240.00€
Kui sul on silmas mõni konkreetne sanitaartehnika toode, mida meie poes pole, siis võta meiega ühendust: info@digigo.ee