Duofix installation element for wall-mounted toilets, concealed - Sigma 8 cm flush boxes, installation height 114 cm

Intended use

On the wall for fixed toilets with a flush height of up to 70 cm

1 flush, 2 flush volumes or start/stop flush

For floor thickness 0-20 cm

For installation in partially high Duofix system walls, massive walls or in front of plasterboard

For installation in Duofix system walls in the entire height of the room

For installation in front of solid walls or plasterboard

For installation in partial or full-height pre-installation in solid walls or plasterboard forward

For installation in light walls at the height of the entire room

Not suitable for installation in concrete

Features

Type series 2016

The frame is suitable for ceramic toilets with a small contact surface (pressure-resistant wall tiles)

Drain arch for tool-free installation at different depths, adjustment range 45 mm

Connection arch can be installed vertically from the front

Extended floor connection connection elbow

Fixation of sound-insulated drain elbow

Concealed flush boxes, anti-fog insulation

Adjustable instant flush

Viewed flush boxes for tool-free installation and maintenance

Water connection from above, offset to the left

13px;">The failed installation cover protects the service opening from moisture and contamination

The failed installation cover and the possibility of shortening the service opening, suitable for aligning the control panel

With pipe protection for the Geberit AquaClean water supply line

Frame for installation in wooden structures with 9 mm diameter holes

Self-supporting element

Frame with 4/4 cm C-profile

Powder-coated frame surface, Geberit Blue

Supports extendable by 5 cm

Rotating support plates for installation in UW50 and UW75 profiles

Technical information

Hydraulic pressure range 0.01-1.0 MPa

Maximum working water temperature 25 °C

Rinse water volume - factory setting 6 and 3 l

Large rinse volume: 4.5 / 6 / 7.5 l

Small flush volume: 3/4 l

Delivery set

Water connection R 1/2, suitable for MeplaFix, with integrated angle valve and manual adjustment button

Cover for approximate fitting of the maintenance opening

2 anchor elements

WC connection set, ø 90 mm

Connecting elbow 90° from PE-HD, ø 90 mm

Adapter, PE-HD, ø 90/110 mm

2 protective caps

2 threaded rods M12

quality selection DigiGo e-shop